I was able to access and replace all parts. IUnit test good.

CX complaint was that the unit would not complete a wash cycle. I found the unit had a F8E1 error code stored in diag. I was able to clear the code and run a manuel test on the valve. I found that the cold side valve would not open to allow water the pass. I was able to access and replace the water inlet valve and unit now test good.

Cx complaint unit has fan running continuously. Was able to access unit but unable enter diagnostic due to console unresponding. Found blower fan running continuously. Ordering console and control and once in office will need to set return.; ordrng 1 W11100513 (control) and 1 W10915031 (console)

Cx complaint unit has fan running continuously. Was able to access unit but unable enter diagnostic due to console unresponding. Found blower fan running continuously. Ordering console and control and once in office will need to set return.; ordrng 1 W11100513 (control) and 1 W10915031 (console)