Appliance Repair Laurel Delaware

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHW00
Near Laurel, DE 19956
Michael E.
Job Details: 07/20/2022
"CX complaint: IM intermitantly stops cycling. Tested and verified complaint. I found IM stuck in cycle, not resuming when door switch is depressed. Jumped IM and it did resume cycle. Replaced IM, tested unit and it is now working properly. Job is complete"
We serviced a
WHIRLPOOL RANGE
Model WGE745C0FS01
Near Laurel, DE 19956
Michael E.
Job Details: 07/11/2022
Replaced main harness as per previous diagnosis. Tested and still having problem. Ordereing light harness and marking cooktop harness and element for return visit just in case. Cannot rescheduyle due to SO part; ordrng 1 W11172531 (harns-wire)
We serviced a
WHIRLPOOL WASHER
Model WTW5000DW2
Near Laurel, DE 19956
Frederick R.
Job Details: 07/08/2022
"CX complaint is Wm bounces all over and wont drain properly. Inspected/tested unit and verified complaint. CX had drainhose 2ft down inside standpipe. Shortened drain house. Unit worked goot other than spin which at that time the basket was bouncing all over the place. Ordering gearcase, spultch, belt, motor and suspensiuon. Cannot reschedule because this is Lowes contract and needs authorization. 2 ct gearcase; ordrng 1 W11454734 (gearcase) and 1 W11283592 (motor-drve) and 1 W10721967 (drive pulley) and 1 W11239857 (belt) and 1 W10913953 (actuator) and 1 W11130362 (suspension)"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ0
Near Laurel, DE 19956
Michael E.
Job Details: 06/23/2022
"CX complad unit leaking back left side. Tested unit and verified complaint. I found the inner piece that secures the inlet had not been tightened. I corrected the inlet, tested unit and it is now working properly. Job is complete"
We serviced a
WHIRLPOOL WASHER
Model WTW5100HW1
Near Laurel, DE 19956
Michael E.
Job Details: 06/23/2022
Replaced lower harness and actuator as per previous diagnosis. Tested unit and it is now working properly. Job is complete