"Replaced spark module and switch harness, testd unit . unit is now working properly."

cx complant of unit clock not working and if you use the cook top to light gas the clock loses power when sparking unit needs spark mod and switch harness; ordrng 1 W10183582 (switch harness) and 1 WP7431P06460 (spark mod)

cx says that when they use the left 2 burners the display shorts out. removed the left cartridge and turned the left knobs to spark and the unit is sparking good with the right burners and lighting. reinstalled and the left burners ignite. cx then said all the burners work but the oven cuts out the display. set the oven to preheat 350f and had all burners active. cannot duplicate the fault

cx says that when they use the left 2 burners the display shorts out. removed the left cartridge and turned the left knobs to spark and the unit is sparking good with the right burners and lighting. reinstalled and the left burners ignite. cx then said all the burners work but the oven cuts out the display. set the oven to preheat 350f and had all burners active. cannot duplicate the fault

cx says that when they use the left 2 burners the display shorts out. removed the left cartridge and turned the left knobs to spark and the unit is sparking good with the right burners and lighting. reinstalled and the left burners ignite. cx then said all the burners work but the oven cuts out the display. set the oven to preheat 350f and had all burners active. cannot duplicate the fault