"customer stated that the unit wasnt cold enough on the ff side. fnd unit not defrosting.. replaced ff evap fan assy, unit cks ok."

"installed part, unit cks ok"

i explained to the customer that the burner screws were rusted and that could cause issues when dissasembling the unit. the customer didnt want to further diag due to this. the units front right igniter and left rear igniter are not functioning and are cracked.. customer to replace the unit..

"installed evap and drier, pulled vacuum and recharged, unit cks ok"

washer stopping mif cycle and not progressing checked faults storing long fill error removed striker and started quick wash checked flow sugguesting valve noise also when cold water entering sense wash/ done ; ordrng 1 W11210463 (valve)