"cx complaint goes straight from wash to done, found f7e4 re-engagement error, found slider seperated, replaced slider from pre-id, recalibrated and tested all ops ok"

"cx complaint has to pull hard to open and makes loud noise once opened, confirmed issue, something in latch bound up, replaced latch and strike from pre-id, door now closes smooth, filled rinse aid for cx, no errrors stored tested all ops ok"

"installed evap cover, and control kit( main and front ui), , and right door gasket per previous, tested all ops ok"

"cx complaint not cooling uphalf of RC, ice clumping in bin, found RC evap frozen over found fan stuck in ice, test 90 can hear relay click but heater not activating, T3 RC evap thermistor read 78 although RC temp 41, ran forced defrost and evap thermistor went down to 66??? control and thermistor not communcating, service pointer for iceclump, needs control kit, cx called whirlpool and was able to get parts autho, ordering control kit, right gasket and will use evap cover on return....cx will defrost , collected $230 visa for service and labor, cx paid in full; ordrng 1 W11533212 (control kit) and 1 W10917313 (gasket-dor)"

"using paint pen, sealed the cracks in the oven cavity enamel."