Appliance Repair Bridgeville Delaware

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
KITCHENAID REFRIGERATOR
Model KRFF507HPS03
Near Bridgeville, DE 19933
Frederick R.
Job Details: 10/21/2022
"CX complaint is prior compressor making loud rattling noise. Upon arrival this unit was cooling both sections well but had a loud rattling from last replacement. Replaced compressor again per prior diagnosis. Pressure tested with nitrogen, vac'd unit dow to 30 in. Fill with 56g of R600. Compressor is running good and unit is working as designed. Job is complete"
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF507HPS03
Near Bridgeville, DE 19933
Frederick R.
Job Details: 10/21/2022
"CX complaint is prior compressor making loud rattling noise. Upon arrival this unit was cooling both sections well but had a loud rattling from last replacement. Replaced compressor again per prior diagnosis. Pressure tested with nitrogen, vac'd unit dow to 30 in. Fill with 56g of R600. Compressor is running good and unit is working as designed. Job is complete"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT970SAKZ0
Near Bridgeville, DE 19933
Michael E.
Job Details: 10/18/2022
"CX complaint: not starting. Teasted and verified complaint. I found the inlet valve under sink was shut off. I opened the valve, tested unit and it is now working properly. Job is complete"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT970SAKZ0
Near Bridgeville, DE 19933
Michael E.
Job Details: 10/18/2022
"CX complaint: not starting. Teasted and verified complaint. I found the inlet valve under sink was shut off. I opened the valve, tested unit and it is now working properly. Job is complete"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRB322DMBB03
Near Bridgeville, DE 19933
Michael E.
Job Details: 10/17/2022
"CX complaint: starnge sound. Tested and verified complaint., I found that the refridgeration system is making the sound when compressor turns off. It is from refridgerant moving through the lines. I adjusted lines and tested and the sound was much less than it was on first test. Unit is working properly. Job is complete"