Installed new fc door and fc harness. applied heat to seal to adhere to cabinet .. Job complete

"cx concern of noise while spinning, found shifter not operating and clucth not engaging ..found the gearacse splattered gearoil all over underneath components .. unit needs gearacse, clutch , belt and shifter.. ordering gearacse nut due to it being stripped .. also washplate is seized ..; ordrng 1 W11449840 (gearcase) and 1 W10721967 (clutch) and 1 W11239857 (belt) and 1 W11481722 (shifter) and 1 W11551646 (nut) and 1 W10902814 (washplate) and 1 2ct (2ct)"

"Removed and replaced the control and the water valve assy tested and inspected for proper use verfied unit is spinning and agitating properly found shifter clicking rapidly and not functioning properly Ordering the shifter and capacitor, will return with harness for issue.; ordrng 1 W11395618 (Capacitor) and 1 W11481722 (Shifter)"

unit is doing funny stuff filling while runing and doesnt stop will need control and watr vavle ive seen where the cap and harness could be the cuase of control having issues will kep those parts too; ordrng 1 W11519742 (control) and 1 W11220230 (water vavle)

"CX Complaint is the FC is frosting over, Inspected unit and found the unit is unplugged no frost pulled FC cover and ohm out thermistor its reading 76deg and thats good harness to heater is good fan motor is good and heater is ohming good. Control not sending power to heater, Replaced control"