CX complaint FRIDGE inconsistent water dispense. Replace supply hose & install regulator & check for leaks. Test dispenser & icemaker.Calibrate measured fill. NO LEAKS > JJ

Cx complained the unit did not dispense or was slow to dispense at times. There is literally a whole service pointer about this issue that says to order and install pressure regulator. Unit needs new tubing and pressure regulator; ordrng 1 8212547RP (pex tubing) and 1 W10786952 (pressure regulator)

CX complaint FRIDGE water dispenses not consistent. Flows fast & then slow the next time it is used. Checked flow with & without filter. Pulled out unit to check for kinked line. CX did not have another filter to try. Parts OOS > JJ; ordrng 1 W11451366 (filter housing) and 1 W11451365 (reservoir)

"Installed ui, control, and evap cover. Fan running good. Unit is working as designed."

"Cx complained the unit made noise and did not cool. Inspected the unit and found that the evap fan was not running and slight frost buildup. In step 128, the control version is correct. Step 57, the fan did not turn on. Unit needs new evap cover, user interface and control.; ordrng 1 W11610998 (evap cover) and 1 W11585971 (user interface) and 1 W11574770 (control)"