CX complaint ICEMAKER made a few batches of ice then stopped. Checked valve getting only 4.7VAC. Recirc pump is working so control has 120VAC. CX piad in full part in stock. Office 9 - 5 hours > JJ; ordrng 1 W11034363 (control)

CX complant. Ice maker making small ammounts of ice. Inspected unit and found ice maker dosent fill resivoir all the way. Found water just trickles out of hose. Will need inlet valve. . CX paid in full. Further work needed. RB; ordrng 1 w10897719 (valve 132.64)

replaced knob and timer tested unit heating and cycling noise when in spin found change in baffle removed

CX complant. Dryer takes long time to dry. Inspected unit and founs 123 and 123 volts at terminal block with 246 across the poles. Tried a het cycle and control timer knob is broken and timer dosent click on to each selection. Tested unit on heat and unit is heating. Dryer failed vent test. Second floor exit is clogged with lint. Advised CX to not use until vent is cleaned by vent cleaner due to height of vent exit . Ordering timer and knob. Will use TCO and heater if needed on return trip. Not in stock. RB; ordrng 1 WPW10185992 (timer) and 1 W11643382 (knob)