"Cx complaint unit doesn't heat. Ran unit on normal cycle and found no heat coming through. Removed back panel and found no continuity at the thermistor. All other components checked good. Ordering thermistor, set return for 12/8, office will contact cx with time frame; ordrng 1 8577274 (thermistor)"

"Replaced electrode, restored power and now all burners ignite and the flames are adjustable. Unit checks good"

"CX complai t is that the left rear burner will not light and that the flame on the surfaceburners are too high. I found that the unit has been converted to LP correctly. I was able tk turn the burners on low and adjust the flame lower to suit CX needs. I did finde that the left rear electrode is not sparking. I was abel to determin that the electrode is secure in the spark mod , but not sparking. I am orderign 1 electrode for the LR burner and 1 spark MOD. Once the parts are avalible, please have someone form teh office call to set a return date.; ordrng 1 W11590249 (spark MOD) and 1 W11688146 (LR electrode)"

"Replaced all parts per previous tech, restored power, allburners and oven ignited and began heating without console shutting off. Unit checks good"

cx complaint that unit is intermittingly flashing code f2e0 keypad dissconnect... and wont work then will work.. i checked power and checked onnection to the ribbons and per the tech sheet and trouble shooting guide reoplace required parts.; ordrng 1 W10909669 (console) and 1 WPW10603096 (display board.) and 1 W11025616 (communicatio ribbon)