"Client's complaint was the dishwasher wasn't cutting one, confirm the issue when I got to the house. The unit was plugged into the bottom socket under the sink. The top socket didn't work at all. And the bottom socket cut off and on sporadically.The unit does work, but the client will need electricians to come out and take a look at the outlet and see why the plug is cutting off and on"

"Cx states unit shakes/moves during spin, drain hose rubs wall, tested and confirmed. Found front feet over extended, causing unit to tilt back. Leveled unit, secured drain hose with zip tie, ran auto test, unit is now working properly."

"replaced parts pulled sys down to vacuum 30 inch filled unit with 62gr of r600a high side pressure not moving compressor locking again 120vac confirmed continuosly to compressor need to return with parts SEALED SYS 3 COUNTS AGAIN CX WILL CALL CX SERVICE SINCE UNIT HASNT OPERATE TO BEGIN WITH; ordrng 1 W11580057 (COMPRESSOR) and 1 W11506635 (process coupler) and 1 W11109499 (drier-tube) and 1 W11506626 (COUPLER FOR RESTOCK JH VS), used 1 W11506626 (COUPLER FOR RESTOCK JH VS) from stock"

"CX complaint about unit not cooling found both cavities @ room temp found that compressor is locked & getting overheated relay keeps cycling on/off winding resistnace 6,7,13 ohm issue with compressor wil need evap just in case refrigerant wont come out on discharge 3 COUNTS SEALED SYS TECH R600A; ordrng 1 W11580057 (compressor) and 1 W11109499 (drier-tube) and 1 W11546605 (evaporator) and 1 W11504449 (coupler) and 1 W11506619 (coupler) and 1 w11506635 (process coupler)"

"Cx states ice not dispensing properly. Installed new solenoid, cx left IM off so there was no ice in bin, tested cubed ice setting, solenoid is activating properly."