"cx complaint cooktop damaged, verrified damage, replaced cooktop, tested, unit working as designed. this is a d&g service job. accidental damage covered."

"cx complaint lights out, checked unit found fc light out, ceiling lights dim, jumpered fc led, rc lights lit up, replaced fc led, tested unit working as designed, s code covers repair."

"cx complaint unit not starting, checked unit verrified 240 vac at terminal, 120 vac at pts switch, 30 vac output N-lbu wires, jumpered lbu wires motor still wouldnt start, called techline spoke with Bruce, verrified L1 voltage loss at timer. expart, reffered cx to maytag for part updates.; ordrng 1 W11625516 (pts switch) and 1 W11566735 (timer)"

"cx complaint excessive noise/ vibration. checked unit found f0e9 off balance code, instalation good, found back panel flexing causing drain and inlet hoses to bang on wall and back of unit, added foam gasket to secure panel, and secured hoses with zip ties, ran drain and spin with 4 wet towels, noises minimized, unit working as designed.; ordrng 1 W11159728 (gasket), used 1 W11159728 (gasket lr/vs) from stock"

"replaced gearcase, calibrated, tested, unit working as designed."