Cx complaint ios that the unit is not heating except on the popcorn setting. Upon arrival I verified the issue. I then accessed the control and found that one of the wires was not connected to the relays. i was able to rescure the connector. I then tested the unit and found that it is now heating as intended. Job complete

Was able to access unit and replace parts per previous visit. Tested unit and unit now works as designed. cx disconnected unit and moved unit away from hookup after repair done. No further work needed

"CX complains unit is showing error and will not run cycle. unit shows f1e1-acu failure , f3e2-moisture sensor short. Found L1-N=121.3, L2-N=243.2 and L1-L2= 122.4. Unit is recieving improper voltages and causing issues. Told cx about voltage issue, CX to correct wiring issue and see if unit issues are fixed. No further work needed."

"Replaced parts per previous tech, ran test and unit completed test without issues. Unit checks good"

cx complaint unit is not producing clean clothes. I found agitator teeth were stripped not allowing agitator to agitate. unit needs agitator to correct scheduled cx for 11/3/23.; ordrng 1 WP3951744 (agitator)