"cx complaint of unit not spinning out. checked unit and found the following code f7-e6. checked under unit and found nidec block style actuator had slipped from splutch. removed and replaced actuator, calibrated, tested, unit works as designed."

"cx complaint of long dry times checked unit and found exhaust thermostat not cycling as it should removed and replaced thermostat. Tested, unit is working as designed."

"cx complaint of long fill times. checked unit and found the following codes. F8-e1. Manually operated valves, hot is good, cold no flow with voltage present. removed and replaced water valve, calibrated, tested, unit works as designed."