replaced all partsTested and Calibrated unitunit working as intended

replaced dispenser. tested unit. dispenser door opened on its own. unit is now working properly

"cx complaint dispenser door wont open. inspected unit and verified complaint. found solenoid just buzzes because the cam inside dispenser detached from the solenoid. ordering dispenser, in stock. scheduled return visit for 11/30; ordrng 1 W11412300 (dispenser)"

"cx complaint unit intermittently giving f0e9 off balance pause error, cx has tried all different load sizes. f3e3, f0e5 and f0e9 errors stored. cx has tried redistributing load and running drain and spin, sometimes that completes but sometimes it gives error again. suspension tests good, basket and gearcase check good. got 5 towels wet and ran unit on drain and spin, tried both medium and fast spin, both completed properly, no shaking and basket spinning true. called techline. TL mentioned unit checks amp draw on motor to see if its off balance. motor windings each read 5.6ohms which is good but i want to try replacing motor and control anyway since she doesnt hear it shaking when it gives error so may be something wrong with off balance detection.; ordrng 1 W11283592 (motor) and 1 W11624938 (control)"

Customer complaint unit is not starting the unit will just run for 2 seconds and then it stops. I tested and found the unit is detecting the door open. I inspected unit and found the top trim was not installed correctly and the trim was hitting the door pushing the door open when after a couple of minutes. I removed the trim and the unit worked fine. Installed trim correctly. Unit is not heating for as long as it needs to be. Unit is back to normal operations.