"cx complaint unit not cleaning dishes, checked unit found 4-3 motor code, 120 vac to motor, motor not turning, also documented physical damage to front panel; ordrng 1 W11613480 (sump and motor)"

"cx complaint frost in fc, checked unit, temps 4 and 30, unit running, focusing on fc, frost on ice and product, doors sealing, called techline spoke with rich, advised to seal around fill tube, heat exchanger and fc molex, also arpound p trap and ff cabinet, sealed around all components listed, advised cx to monitor, unit working as designed.; ordrng 1 8201711 (adhesive LR VS) and 1 212643 (sealer-gum), used 1 8201711 (ADHESIVE LR VS), and 1 212643 (SEALER LR VS) from stock"

"cx complaint dispenser moving during cycle, checked unit no error codes, verrified unit level, slowed water flow at ball valve, advised cx there is no lock to hold drawer in, but there is a stop to keep drawer from falling out, unit working as designed."

"cx complaint dishes not clean, checked unit found 10-2 wax motor code, ran diagnostics after running 7-1 motor code appeared, motor just replaced, motor 9.2 ohms from control, 124 vac from control to motor, called techline spoke with steve, checked all connections, advised to replace acu, ordering acu kit per service pointer, also possible bad motor installed. ; ordrng 1 W11629911 (acu) and 1 W11416362 (sump and motor) and 1 cleardoordishwasher (clear door dishwasher)"

"cx complaint loud noise, checked unit, no codes, found oil from bearing in gearcase, also found rub marks on drip pan, legs extended, found weak LF suspension, advised cx office would contact to schedule.; ordrng 1 W11130362 (suspension) and 1 W10752283 (washplate) and 1 W11454734 (gearcase) and 1 W10721967 (cam) and 1 W11239857 (belt)"