"installed parts, unit cks ok."

"instaled parts, unit held vacuum, verfied cooling, unit cks ok"

"verified leaks at the lower drier fitting, low side stub and high side fitting on the compressor.. the unit will need compressor and drier installed with solders to correct the issue..need parts..; ordrng 1 w11557671 (compressor) and 1 w11566897 (evap) and 3 3callcount (3 call count)s"

customer stated that the unit would fill during spin.. ran testes and fnd valve is function correcty and fnd no errors stored... will need control and valve; ordrng 1 w11608056 (control) and 1 w11641117 (water valve)

"Customer complaint is that the unit has stopped making ice again, feels the freezer is too warm. Inspection of the evaporator found a partial frost pattern. Unit has a sealed system issue, likely a refrigerant leak. Ice maker turned off. Contacted Whirlpool Tech Support with findings. Determined that a sealed system needs to perform a nitrogen test on the unit to determine where the leak is at and then contact tech support again.; ordrng 1 nitrogen (nitrogen) and 1 W11109499 (drier-tube) and 1 W11504433 (Lokring) and 1 W11504447 (Lokring) and 1 W11506635 (coupler)"