Cx complaint is that the unit will not go past wash. Upon arrival I found tha tthe unit had an F8E1. I then ran the diag cycle and found that the cold water is barely fill. I was able to access and replace the valve and the unit is now functioning as inteded. Job complete

Per previous diag I was able to access and replace the lower harness and splutch. I then ran the calibration test and the quick diag test and the unit is now functioning as intended. Job complete

"Per previous diag I was able to access and replace the motor, capacitor, control and also an actuator from VS. I then attempted to run the calibration cycle and found that the shifter error came back and the unit is not finishing the cycle. I found that the lower harness needs replaced. I am ordering the lower harness and will use the splutch on return. Please contact cx when the parts are available to schedule the retrun visit.; ordrng 1 W10903238 (Lower harness), used 1 W10913953 (Actuator) from stock"