"Customer complained popping noises when heating .inspected unit and found oven floor and deflector warped and not seated correctly.also the racks rungs popped the weld unit need new rack,oven floor,and deflector.unit is under 30 days warrenty.ordered floor deflector and rack .call Cx when parts avilible.; ordrng 1 W11098799 (bottm-oven) and 1 W10670197 (baffle-btm) and 1 WPW10550642 (rack-oven)"

installed harness and valve .tested unit valve is working on all settings .unit back to normal operation

"Cx states long dry times. Started timed dry cycle, unit is heating, checked dryer vent exit, virtually no air flow coming out of vent exit. Checked dryer and vent extension for blockage, dryer and extension clear. Recommended cx contact vent cleaning service."

"Cx states gasket not sealing, inspected and confirmed. Used heat gun to adjust gaskets and generate seal. Small wrinkle developed in FC gasket, ordering gasket.; ordrng 1 W11574983 (gasket)"

CX complaint about temperatures warming on both compartments & not making ice inspected temperatures are fine now but can see that unit was overfrosting ice formed on back wall put unit on forced defrost & heater getting hot need control board not putting unit to defrost cycel constantly; ordrng 1 W11566851 (ctrl elec)