"Cx complaint unit doesn't fill. Entered diag and found error code F8E2 inlet valve fault. Removed kickplate and found the wire had pulled out from connector to the valve. The wire is unable to be reconnected. Ordering harness, once available contact cx to reschedule; ordrng 1 W11568793 (harness)"

"Per the previouse tech, I was able to access and replace all parts. I then plugged unit back in and found all lighting restored. I entered diag and found that the icemaker filled with out issues. UNit test good."

sealed the gasket on the fc door.. and replaced the triple valve. and testedn o noise adnormal and door seals and allow time to properl y work if cx calls back pleasse send me a shop jkob back.

cx ocmplaint that unit is bleeding gas when just idoling.. i found no leaks at the house hookups and when i checks the internal gas burner assmebly could noticeably smell bleeding gas they have had this for a month and been from the first day they had this issue and licences plumber and gas company alsop been out to verify that. oirdering the burner assembly and schd for the 27th.; ordrng 1 W11652257 (urner aassembly)

cx complaint that unit is not making ice again after several attempted repairs.. i found e5 in test 56 and in test 57 does rotate again and harvest in test 45 the fill tube is frozen again.. i checked vdc in test 19 with techline sopeaking with derrick had reading of 12.64 vdc in test 19 which is good. found ui logic to auro board close circuit.. will need ui per derrick TL. also then found the led board had failed while speaking with cx and disconneected all connection of W10804160 led baord and unit came back on spoke to MR and also ordering led baord call to reschd ..; ordrng 1 W10804160 (led baord) and 1 W11577100 (ui)