Appliance Repair Marbury Maryland

VIA INC Rated out of 5 stars based on customer reviews

We serviced a
WHIRLPOOL RANGE
Model WEG745H0LZ1
Near Marbury, MD 20658
Shane B.
Job Details: 11/21/2023
installed ordered part and restored power. tested oven for cx. unit is working as designed.
We serviced a
WHIRLPOOL RANGE
Model WEG745H0LZ1
Near Marbury, MD 20658
David J.
Job Details: 11/15/2023
"F3e0 main oven sensor errorF1e1 internal errorCx complaint errors appear when trying to use oven. Inspected and verified. Found 2 error codes above. Disconnected power and removed console found mice droppings and nest making under lid. Removed old control and replaced with part that pre id ,found box of part to look pretty rough but control looked good. Installed and reassembled unit. Now I does not power on. Removed console again and found all wires were secure and installed properly. Re ordering control. All burners work properly, will return when pars arrive. Cx was going to call whirlpool to see if they can get that part faster due to thanksgiving. ; ordrng 1 W11564648 (Main control)"
We serviced a
MAYTAG DRYER
Model MEDB835DW
Near Marbury, MD 20658
Leon
Job Details: 09/08/2023
"cx complaint dryer not drying clothes, inspected unit checked outlet to see if unit was getting enough voltage, L1 was getting 120v, L2 was getting about 60v. advised cx to have electrician look into the outlet, cleaned out dog fur inside unit as well"
We serviced a
MAYTAG WASHER
Model MVWX700XL2
Near Marbury, MD 20658
Robert A.
Job Details: 06/15/2022
"Cx complaint that the unit is not starting cycles and giving loud noises. I inspected the unit and confirmed the complaint. I found error codes f7e1 f0e0. I cleared the codes and ran a service cycle, the unit rumbled from underneath and did not start the service cycle. I checked underneath and found the clutch loose, the belt and shield and damaged as well. The unit will need a new belt, shield and clutch to resolve the issue. I'm ordering the parts for the return visit. I collected the payment in full by cash.; ordrng 1 WPW10006384 (belt 24.98) and 1 WPW10427633 (shield 29.52)"
We serviced a
MAYTAG WASHER
Model MVWX700XL2
Near Marbury, MD 20658
Robert A.
Job Details: 06/15/2022
"Cx complaint that the unit is not starting cycles and giving loud noises. I inspected the unit and confirmed the complaint. I found error codes f7e1 f0e0. I cleared the codes and ran a service cycle, the unit rumbled from underneath and did not start the service cycle. I checked underneath and found the clutch loose, the belt and shield and damaged as well. The unit will need a new belt, shield and clutch to resolve the issue. I'm ordering the parts for the return visit. I collected the payment in full by cash.; ordrng 1 WPW10006384 (belt 24.98) and 1 WPW10427633 (shield 29.52)"