"Installed new LF burner switch, replaced spade connector for downdraft fan, tested, unit is now working properly."

GOT HERE cut into system full of refrigerant replaced parts pulled sys to vacuum 30 inches filled with 4.5oz of r134a unit holding pressures & start cooling

"Cx states unit leaking. Entered diagnostic mode cleared saved F0E8 (water ring), ran auto test, once unit began drain water started pouring out the bottom of the sink, inspected, found sink disconnected from drain pipe. Auto test completed with no errors. Leveled washer, recommended cx call plumber to have drain pipe repaired."

"Installed new console and vent, ran service test cycle, completed with no errors, all buttons working, unit is now working properly."

"Cx states unit not washing dishes, tested and confirmed. Entered diagnostic mode, found saved F4E3 (motor not running) and F7E1 (no heat), found wash motor receiving 120VAC from control, but motor not running, no debris found in motor, heater is working. Ordering sump assembly.; ordrng 1 W11025157 (pump&motor)"