replaced the control and dispenser control than i relized the fc door switch is frayed ordering new fc door switch dispenser is working and ice maker; ordrng 1 W11396033 (Whirlpool Refrigerator Door Light Switch)

"Cs unit is not cooling, confirmed complaint.I found after cutting into system it has a charge, plugged unit in and compressor was not compressing. Replaced compressor and vaccum unit down. Unit held a vaccum no leaks detected . Filled wituh 56g r600. Evap started buidling a frost patter, advised allow 24hrs for temps to come down. Unit is now working as designed."

"CHECKED THE MIRCO SWITCHES GOOD NO POWER GOING TO THE SWITCH FROM THE U.I. 0VAC ORDERING NEW CONTROL AND U.I. CHECKED THE FC DOOR HARNESS DIDN'T FIND ANY BROKEN WIRES; ordrng 1 W11518204 (Whirlpool Refrigerator Dispenser Control Board - Black) and 1 W11558182 ( Control, Electronic)"

"cx complaint unit not cooling since day 1. inspected unit and verified complaint, room temp in both sections. at first i thought compressor wasnt running so i pulled unit out to make sure start device didnt fall out. once behind it found compressor is running but very quiet. both fans are running. must have leaked out refrigerant. ordering evaporator, compressor, drier and nitrogen. call cx to schedule return visit once we have eta on parts. 3ct SS tech only; ordrng 1 W11598434 (evaporator) and 1 W11506620 (FSPW11506620) and 1 W11504450 (cap tube to evap) and 1 W11614224 (compressor) and 1 W11504431 (coupler) and 1 W11504415 (coupler) and 1 W11506621 (coupler) and 1 W11506635 (access valve) and 1 WPW10143759 (drier) and 1 W11504445 (coupler) and 1 W11504447 (coupler) and 1 NITROGEN (NITROGEN)"

ADJUSTED THE DOORS AND LINED THEM UP UNIT CHECKED GOOD.