replaced the control/pressure switch/valves unit tested good and cycling and fill ing poroperly

CX COMPLAINT FROM DAY ONE SENSOR DRY WASN'T FULLY WORKING PROPERLY FOUND THE ITEM WHERE GOING TO THE BACK OF THE DRUM I RAISED THE UNIT IN THE BACK SO ITEM GO FORWARD AND HIT THE SENSOR AND GIVES ACCURATE AUTO DRYING UNIT TESTED GOOD.

"cx complaint that is showing a LF error code i ran the test cycle and also ran the test 1,2,3 etc being the valve testing... i found good psi from hose when detached from the unit .. screens cleaned not clogged dirty at time of apt. being on well water. .. i ran test cycle and all functions operated far has draining, locking tumbling and spinning. and got the f8e1 code stored again and stops.. will need acu and valve for return. call to resch all in stock; ordrng 1 W11632339 (acu) and 1 W11316255 (hot vlve) and 1 W11316256 (cold vlve) and 1 W11316246 (psi switch)"

E5 ONLY SMALL CUBES AND THE ERROR SHOWS I/M HOLDING CUBES TO LONG AND AND PRODUCING LOW ICE AND SMALL CUBES ORDERING NEW I/M; ordrng 1 W11658802 (Whirlpool Refrigerator Ice Maker)

cx complaint unit stoped working i repaired harness and recalb washer unit tested good the wire to the pump frayed