"cx complaint unit not washing. inspected unit and verified complaint. f4e3, f2e1, f7e1. unit is heating. washmotor reads open and control not sending power to it. ordering sump asm and control. call cx to schedule return visit once we have eta on parts; ordrng 1 W11613479 (sump asm) and 1 W11637581 (control)"

"installed high side per previous, tested all ops ok"

"Cs unit is not completing a load, confirmed complaint. Found error codes f9e1 long/no drain, I vaccumed out the water because drain pump didnt want to come on. Remoeved drain pump at ohmed ouit 19k and its getting 123v. Reinstalled drain pump and everything starting working again, Test cycle completed. Maybe a loss connection or bad wiring. Advised use the unit as normal, if it happens again preid drain pump and lower harness."

cx complained unit rc wasnt cooloing .confirmed cx complaint after inspecting unit. installed new fan motor assembly. unit now working a should

"cx complaint not turning on, found 0v at terminal, found breaker half tripped, reset breaker lever seems weak, found proper 116/117/241at terminal, door switch in tact, found open thermal fuse, replaced fuse , tested all ops ok"