"cx complaint of unit not dispensing ice. checked unit and found cog in ice bin popped out of place, yoke on auger free spinning and will not back off as threads on auger are sheared. Unit needs auger, yoke, ice bin and divider.; ordrng 1 WPW10309864 (divider) and 1 W11310391 (auger)"

"cx complaint of unit not turning on. Checked unit and found door switch had failed internally. Quoted cx 120 service call, 110 labor, 15 shipping, 41.35 door switch, 2.89 in tax, 289.24 in total. cx agreed. Removed and replaced door switch, tested, unit is working as designed. cx paid in full by card."

"cx complaint of unit not spinning out. Checked unit and found the following codes f5-e2, f0-e2. Ran test and found basket to bounce and thump around quite a bit and noise from bearing. Unit will need a tub and suspension. Checked pressure lines for oversuds condition and lines are ok so will replace pressure sensor.; ordrng 1 W11316246 (switch-wl) and 1 W11378552 (tub) and 1 W11545322 (shocks)"

"removed and replaced suspension, splutch and belt, calibrated, tested, unit works as designed."

cx complaint of unit not working. Checked unit and is doa. Checked voltage to unit and found l1 to be reading 240 vac at unit but 120vac at junction. Checked all components of unit that could close and allow l2 to meet l1. Found temp probe shorted and in turn shorting control internally causing 240vac to l1. Disconnected temp probe and unit powerd on. Will replace temp probe and control; ordrng 1 W10859573 (sensor)