replaced all parts tested and calibrated unit works as designed

"cx complaint unit taking long time to dry. checked unit, everything appears to be working as designed. advised cx to monitor unit to verify working condition and to call back if problem persists."

"cx complaint flames not changing with high/low. verified complaint. lowered flames, found middle burner not igniting then popping big flame once ignited. verified 101/45 spuds. called techline spoke with Austin to document. unit appears to be working as designed. advised cx to monitor unit and to call back if anything changes."

"replaced fascia, leveled, calibrated, tested, unit working as designed."

"cx complaint unit clothes wet at end of cycle, checked unit found f0e3 off balance code, all loads passed in diagnostics, wiring checked good, leveled unit and set to high fill on normal and quick wash, gound small amount of oil in rotor indicating bearing failure in gearcase, ordering gearcase repair, unable to seperate agitatior, or spanner, will likely need to be cut.; ordrng 1 W11449841 (gearcase) and 1 W10734521 (slider) and 1 W11551646 (spanner) and 1 W11550891 (agitator)"