"Cx complaint unit makes noise during agitation. Entered diag and found no error codes. Ran test cycle and found unit makes noise when agitating clockwise, no noise when going the other direction, Inspected underneath and found the splutch bolt loose and rubbing against shield. Tightened bolt onto splutch, ran test cycle and unit no longer makes noise. Unit checks good"

"CX complaint was that the unit has a F8E4 error code. I found that the unit was pulled on at time of arrivel and power was off. I had CX turn power back on. I found several error codes to include a F8E4, F8E2, FAE2 and F7E1. i cleared the codes and ran a auto test. I found that the unit was able to complete the test with out leaking . I opened unit mid cuyce and found SUD's . I edjucated CX to the effects of using dish soap to pre wash or in unit. I advised CX to run clean cycles with white vinagar to help remove suds and to help sanitize the unit. I am ordering 1 water inlet valve (W11434044) due to grinding soun d and low water flow. I found the motor to be opperaitng with out issues. Once the contract is aproved, please have someone for the office call to set a return date.; ordrng 1 W11434044 (inlet valve)"

"Replaced hose, ran test cycle, unit completed cycle without issues. Unit checks good"

"Replaced all parts per previous tech, recalibrated and ran test cycle. Unit completed test without further issues. Unit checks good"

"Replaced timer, restored power and unit began to cool with fan running. Unit checks good"