"CX complant. Fridge not cooling , Inspected unit and found unit on but not running .in diag test tryng to ram compressor unit would not run , Cycled power and started unit again and compressor turned on , Possibal control board issue. Ordering sealed system and control boards RB; ordrng 1 W11578205 (compressor) and 1 W11093037 (control)"

fridge no cool both compartments removed both evap covers checked with black light no signs of dye on either evap removed back cover dye on line near uv dryer transfer to finger ordering uv dryer service within thirty days; ordrng 1 WPW10143759 (dryer)

combi oven unit cycling on and off at random times and powered off and customer had to leave breaker off over night when trying to enter diag nothing happened 1st time resetting oven light on but console dead unit storing f6 e0 error for ui to control lost comminication ui version 16.00tested oven on bake at 350 f teste icrowave door reading open when opened and closed when closed customer saying at times says to open and close door to start cycle ; ordrng 1 W10821712 (control) and 1 WPW10260060 (oven control) and 1 WPW10128850 (arm) and 2 W10874474 (door hinges)s

dryer long dry times and lint on back of filter tested unit with thermocoupler going pass 300 f venting to wall warm also door gasket failing coming apart tested vent suction with paper towel and vent attached nothing removed vent pulled paper towel into vent informed customer to have venting checked; ordrng 1 W10906683 (gasket) and 1 279368 (adhesive)

per notes installed control vent and bezel console and dispenser diag no errors after and now all buttons responding customer and a concern with height of dishwasher informed customer due to the counter tops in this home the bracket for mounting is glued under cabinet unable to raise any higher