replaced ice bin workingfine found issue with Freezer not being gasket but way drawer was closing removed door & ice formation found items dropped behind main bin causing alignment to not close all the way remove items & cleared all frost door closing fine inspected gasket & looked fine FC drawer close properly

"Cx states unit not making ice, doors not level. Some ice in bin, IM mold empty. Ran test 56, gave E0 no errors, ran test 57 gave 01 completed harvest, cx mentioned water was dispensing slowly, ran test 45, IM not getting enough water. Cx has reverse osmosis system, removed water filter, IM filled properly. Found ice bin has hole in it, frost in top right of FC, gap in gasket. Ordering FC door gasket and ice bin; ordrng 1 W10407216 (gasket-fip) and 1 WPW10347093 (ice container)"

GOT HERE CX states after repair condenser fan will not kick on from time to time middle of liner will start getting hot & temperature will raise went to the back confirmed condenser fan operation connector tight found an intermittent operation of control board causing system to warm up GAVE CX AN ESTIMATE DECIDED NOT TO MOVE FWD YET; ordrng 1 W10823804 (cntrl-elec)

Replaced fan and vavle.. unit tested and ice maker works fine

CX complaint about unit not running inspected found a F7E1not reading speed found a buzzing from cap found svc pointer W11632927C that talks about this scode S17538 cover P&L replaced cap from preid calibrated & working