fridge nolonger cooling while on site start device clicked on whine from compressor than off test 2 compressor click and same issuse sugguesting compressor covered by entitlements parts and labor compressor sp order paid service call fee by cc; ordrng 1 W11557425 (compressor) and 1 W11504416 (Tube Coupler) and 1 W11504431 (Refrigerator Coupler) and 1 W11506621 (Lokring Couple) and 1 W11506635 (Access Valve Coupler)

"Inspected the unit. Found that the cx is saying that the Refrigerator isn't cooling again. Checked the compressor. Pins 1 & 2 = 8.2 Ohms. Pins 2 - 3 = 15.2 Ohms. Pins 3 & 1 = 7.6 Ohms. I then checked the Start Device. I'm getting Open Line on the start Device & Capacitor. Filled the unit with 140 Psi of Nitrogen. Unit is leaking at the Drier. Installed new Compressor, Access Valve & Drier. Filled the unit again with 140 Psi of Nitrogen. I then let the unit sit for 20 mins. No leaks. Filled the unit with 1.9 Ozs. Unit is starting to Cool. Unit is working as Designed. ; ordrng 1 W10843121 (Whirlpool Refrigerator Filter Drier), used 1 W11506635 ( Access Valve ( DS / Vs )) from stock"

"CX complant. Fridge not cod, Inspected unit and found compressor very warm . Can not leave hand on it. CX stated unit cooled for two days after service and stopped. found no uv dye in rear or around evap. Reordering fill , compressor and dryer. Further work needed. wiythin 30 days. RB .; ordrng 1 w11109499 (dryer) and 1 w11557425 (compressor)"

"CX coplant. Dishwasher not scrubbing. Inspected unit and found no error codes in diagnostics. CX has a pot with stuck food in the bottom of pan and believes should be cleaned . Advised CX these dishwashers will remove loose debris but not like pictured . In test wash , spray arnm was blocked from moving by plates . Moved blockages and unit has good spray pressures and washes good. Job completed, RB"

installed part. unit cks ok..