"Loud noise while agitating/ not fully agitating.. tightened the agitator bolt down. replaced the clutch , shifter and belt. tested unit. Job complete"

"Unit full of water , pump is just humming . Vacumed out most of the water , attempt to pull washplate/ basket to get out the rest of water .. washplate is seized .. need to pull basket to get the rest of water out .. ordering washplate, hub and pump; ordrng 1 WPW10276397 (pump) and 1 WPW10553968 (washplate) and 6 WP8533953 (screw)s and 1 W10528947 (hub)"

"CX Complaint is the unit is leaking water and door damaged. Inspected unit and found unit was installed wrong unit is pitched forward to much and is allowing water to leak out the front. Also found inner and outter door damaged, Ordering Inner and outter door.; ordrng 1 W11613483 (Otter door stainless) and 1 W11637956 (Inner door)"

installed parts checksok

unit had gear case failure the rods are bent and cuased gear case to fail also the motor has f7e4 code motor over heated; ordrng 1 W11130356 (rods suspention) and 1 W11393685 (gear case) and 1 W10734521 (cluth) and 1 W10754448 (shifter) and 1 W11550891 (agitator) and 1 W10915700 (stator) and 1 W10915701 (rotor) and 1 2callcount (2 call count)