replaced boards and tested full water operations and checks good

CX compalint was that the unit would not start a wash cycel. I found that the the unit is diag had a F7E4 error code. I cleared the coder and ran a test cycle. I found that during the agitation the unit wouldot move but the run cap would make a loud buzzing sound. I replaced the run cap and unit retested. UNit now completes a test cycle with out issues.

"CX complai t is that the unit is not opperating as designed. I found that the unit has a F2E3 error code. I was able to clear the code and ran a recal and a auto test. i found the error flash again. I am ordering 1 encoder board (W11627516) and 1 control (W11633359). Once the parts are avalible, please have someone form the office call to set a return date.; ordrng 1 W11627516 (encoder board) and 1 W11633359 (control board)"

"Replaced valve, ran test, test completed without issues. Unit checks good"

"Replaced panel and fan, set preehat for 350 and unit reached temp without flashing any error codes. Unit checks good"